It seemed in very good shape, shutter was snappy and within tolerance, RF patch was bright, but the focusing wheel was stiff and the lens was unfortunately full of mold

Zeiss Ikon Contax III - Sonnar 5cm/1.5
I would need the spools as well. I'll stick to setting up for 120, thanks all the same.titrisol wrote: ↑Fri Jul 29, 2022 10:51 amThat SuperRicohflex is a highly under-valuated camera
I bought one years ago as well, and it is a very good TLR
You have the 35mm counter, and with an adapter you could shoot 35mm.
I made an adapter for 3D printing which works fine
https://www.thingiverse.com/thing:4300907
Ricohflex-35mm adapter
Yeah, same here...
It should be possible to remove the front and rear elements of the lens to see if the fungus has etched the lens surface. If it has not, fungus can be cleaned off.titrisol wrote: ↑Fri Jul 29, 2022 10:54 amI borrowed a Contax IIIa (Stuttgart) a few weeks back, to test
It seemed in very good shape, shutter was snappy and within tolerance, RF patch was bright, but the focusing wheel was stiff and the lens was unfortunately full of mold
Zeiss Ikon Contax III - Sonnar 5cm/1.5
I have one of this that I got from Mike, I barely use it now, it has a J-8.titrisol wrote: ↑Fri Jul 29, 2022 10:54 amI borrowed a Contax IIIa (Stuttgart) a few weeks back, to test
It seemed in very good shape, shutter was snappy and within tolerance, RF patch was bright, but the focusing wheel was stiff and the lens was unfortunately full of mold
Zeiss Ikon Contax III - Sonnar 5cm/1.5
Users browsing this forum: No registered users and 10 guests