PhotographyToday.net

Discussions, Community, Learning

Prism separation.

Share your advice about camera repair or ask a question.
alexvaras
Frequent Poster
Frequent Poster
Posts: 615
Joined: Fri Nov 03, 2017 3:01 pm

Prism separation.

Postby alexvaras » Fri May 03, 2019 7:29 am

Hi all,

Any idea (not by force) to unglue this? It's the prism/rangefinder of a Super Ikonta BX. Not Xilene, I can't with the smell.

Image

Thank you in advance,
Alex
0 

Santiago Montenegro
Enthusiast
Enthusiast
Posts: 201
Joined: Tue Mar 25, 2014 10:06 am

Re: Prism separation.

Postby Santiago Montenegro » Fri May 03, 2019 12:29 pm

I'd try modetrate heat
0 

Julio1fer
Frequent Poster
Frequent Poster
Posts: 912
Joined: Tue Mar 25, 2014 9:31 pm

Re: Prism separation.

Postby Julio1fer » Fri May 03, 2019 8:44 pm

Maybe heat slowly in water, up to about 50 C, and try to move it out (do not touch the glass with something cold when trying to move it).

If heat does not unglue it, you will have to try smelly solvents. The glass is in a metal frame, I gather. Acetone could do it (ladies' nail lacquer solvent) but the paint could also come off.
0 

PFMcFarland
Prolific Poster
Prolific Poster
Posts: 1806
Joined: Tue Apr 29, 2014 11:02 pm

Re: Prism separation.

Postby PFMcFarland » Fri May 03, 2019 11:20 pm

Heat will undo the Canada Balsam. Preferably in a water bath like Julio suggests. You'll need to remove all of it, and get some new cement that is cured with UV light. You might want to mark the edges so the alignment will be correct on reassembly, something like a scratch line.

PF
0 
Waiting for the light

alexvaras
Frequent Poster
Frequent Poster
Posts: 615
Joined: Fri Nov 03, 2017 3:01 pm

Re: Prism separation.

Postby alexvaras » Sat Jun 22, 2019 3:31 am

Hi all,

This camera it's finished, client did the tests and he has back a Super Ikonta 533/16 with a clear viewfinder with a perfect rangefinder.
About ungluing, 1 hour inside a jar with water at 180 degrees were enough to unglue it.

Full pictorial:
https://flic.kr/s/aHskQZxP8F

Now I have a Super Ikonta 532/16 and a prism from a 531/2, I will try to match them and make the rangefinder work again :)
Thank you, all, for the advices.
Alex
0 

PFMcFarland
Prolific Poster
Prolific Poster
Posts: 1806
Joined: Tue Apr 29, 2014 11:02 pm

Re: Prism separation.

Postby PFMcFarland » Mon Jun 24, 2019 9:44 pm

You're welcome, Alex. I saw the photos of the repair on Flickr, and you did a really good job.

PF
0 
Waiting for the light


Social Media

       

Return to “The Fix-It Forum”

Who is online

Users browsing this forum: No registered users and 2 guests

 

 

cron

Login  •  Register